Filter
All Products
Bulkhead tie bar, front (steel)
TRAXXASBulkhead tie bar, front (steel)
Gear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
SPUR GEAR 52T MACH STEEL 1.0MP
TRAXXASSpur gear, 52-tooth, machined steel (1.0 metric pitch) Accessory part for these models: Sledge® Sledge®: TQi Traxxas Link Enabled 2.4GHz Radio ...
View full detailsWHEEL HUBS 7MM HEX BRASS
TRAXXASWheel hubs, 7mm hex, brass (1 gram each) (4)/ axle pins (8)
Suspension pins, 2.5x29mm (king pins) w/ e-clips (2) (strengthens caster blocks)
TRAXXASSuspension pins, 2.5x31.5mm (king pins) with E-clips (2) (strengthens caster blocks)
Shock caps (black) (4) (assembled with hollow balls)
TRAXXASShock caps (black) (4) (assembled with hollow balls)
SHOCK MOUNTS F/R
TRAXXASShock mounts (front & rear)/ battery tray
Turnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
TRAXXASTurnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
TRAXXASGear, 12-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
Rod ends, heavy duty (push rod) (8) (assembled with hollow balls) (replacement ends for #8619, 8619G, 8619R, 8619X)
TRAXXASRod ends, heavy duty (push rod) (8) (assembled with hollow balls)
Gear, 15-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 15-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
Shoulder screws, Ultra Shocks (3x12 hex drive) (6)
TRAXXASShoulder screws, Ultra Shocks (3x12 hex drive) (6)
Battery door, transmitter (replacement for #6516, 6517, 6528, 6529, 6530 transmitters)
TRAXXASBattery door, transmitter (replacement for #6516, 6517, 6528, 6529, 6530 transmitters)
TQI RECEIVER 5CH TELEMETRY 2.4
TRAXXASPush rod (molded composite) (red) (4)/ hollow balls (8)
TRAXXASPush rod (molded composite) (red) (4)/ hollow balls (8)
Plate, motor
TRAXXASPlate, motor
Sway bar arms, rear (satin-plated)
TRAXXASSway Bar Arms, Rear, (satin-plated)
Gear, 20-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 20-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
Rod ends, short (6)/ hollow balls (6)
TRAXXASRod Ends, short (6)/ hollow balls (6)
SHOCKS GTX REBUILD KIT
TRAXXASRebuild Kit, GTX Shocks (lower Cartridge, Assembled, Pistons, Piston Nuts, Bladders) (renews 2 Shocks)
Gear, 21-T pinion (48-pitch) / set screw
TRAXXASGear, 21-T pinion (48-pitch) / set screw
Skid plate, roof (body)/ 3x12mm CS (4)
TRAXXASSkid plate, roof (body)/ 3x12mm CS (4)
Ball bearings, blue rubber sealed (5x11x4mm) (2)
TRAXXASBall bearings, blue rubber sealed (5x11x4mm) (2)
Spring, shock (GTR) (3.2 rate, purple) (1/16 Summit) (1 pair)
TRAXXASSpring, shock (GTR) (3.2 rate, purple) (1/16 Summit) (1 pair)
Spring, shock, white (GTR xx-long) (0.762 rate green) (1 pair)
TRAXXASSpring, shock, white (GTR xx-long) (0.762 rate green) (1 pair)
SERVO SAVER ASSEMBLED
TRAXXASServo saver/ servo saver spring/ servo horn, steering (assembled)
DRIVESHAFTS CENTER ASSM (F&R)
TRAXXASDriveshafts, center, assembled (front & rear)
Linkage, sway bar, front (2) (assembled with hollow balls)/ sway bar arm (left & right)
TRAXXASLinkage, sway bar, front (2) (assembled with hollow balls)/ sway bar arm (left & right)
SUSP ARM LOWR LFT WIDEMAXX RED
TRAXXASSuspension arm, lower, red (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
STEERING BLOCKS BLUE L&R
TRAXXASSteering Blocks, Extreme Heavy Duty, Blue (Left and Right)/ 3x20mm BCS (2) (for Use with #9080 Upgrade Kit)
XRT Caster blocks (c-hubs), left & right
TRAXXASCaster Blocks (c-hubs), Left and Right
Wheelie bar, assembled (pink) (fits Slash, Bandit, Rustler®, Stampede® series)
TRAXXASWheelie bar, assembled (pink) (fits Slash, Bandit®, Rustler®, Stampede® series)
Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)
TRAXXASSpring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)
SUSPENSION ARMS BLACK REAR
TRAXXASSuspension arms, black, rear (left & right), heavy duty, 1° toe angle (2)
Ultra Shocks (black) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
TRAXXASUltra Shocks (black) (xx-long) (complete with spring pre-load spacers & springs) (rear) (2)