Screws

Gear, 20-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 21-T pinion (48-pitch) / set screw

Gear, 22-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 22-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 24-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 26-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw

Gear, 26-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 29-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Gear, 31-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw

Gear, pinion (25-tooth) (48-pitch) / set screw

Gear, pinion (28-tooth) (48-pitch) (fits 3mm shaft)/ set screw

Limit strap, rear suspension (2)/ 3x8 flat-head screw (4)

Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

Gear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Primary gears: forward (28-T)/ reverse (22-T)/ set screw yoke pin, M3/12 (1)/ 5x10x0.5mm PTFE-coated washer (1)

Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)

Screw pins, 3x16mm, extreme heavy duty (6) (for use with #9080 upgrade kit)

Screw pin set (Rustler®, Bandit®, Stampede®)

Screw pin, 4x15mm (6)

Screw Pin, 4x18mm (with threadlock) (6)

Screw pins, 4x13mm (with threadlock) (4)

Screw set for Sledgehammer® (assorted machine and self-tapping screws, no nuts)

Screws, 3x18mm cap-head machine (hex drive) (6)

Screws, 3x14mm button-head machine (hex drive) (6)

Screws, 2.5x12mm cap-head machine (6)

Screws, 2.5x6mm cap-head machine (hex drive) (6)

Screws, 2.6x12mm button-head, self-tapping (hex drive) (6)

Screws, 3x10mm countersunk machine (6) (hex drive)

Screws, 3x10mm roundhead self-tapping (6)