TRAXXAS
Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
TRAXXASGear, 12-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
Gear, 14-T pinion / set screw
TRAXXASGear, 14-T pinion / set screw
Screws, set (grub) 4mm (6) (with threadlock)
TRAXXASScrews, set (grub) 4mm (6) (with threadlock)
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)
TRAXXASRod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)
Fuel tank rebuild kit (contains cap, foam washer, o-ring, upper/lower retainers, screw, spring and screw pin)
TRAXXASFuel tank rebuild kit (contains cap, foam washer, o-ring, upper/lower retainers, screw, spring and screw pin)
Primary gears: forward (28-T)/ reverse (22-T)/ set screw yoke pin, M3/12 (1)/ 5x10x0.5mm PTFE-coated washer (1)
TRAXXASPrimary gears: forward (28-T)/ reverse (22-T)/ set screw yoke pin, M3/12 (1)/ 5x10x0.5mm PTFE-coated washer (1)
Body mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x8mm CS (2)/ 3x15mm flat-head machine screw (9)
TRAXXASBody mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (9) Front and rear Maxx® body mounts with ...
View full detailsBattery hold-down/ battery clip/ hold-down post/screw pin (for 256mm wheelbase)
TRAXXASBattery hold-down/ battery clip/ hold-down post/ screw pin/ pivot post screw (for 256mm wheelbase)
Suspension screw pin set, steel (hex drive) (requires part #2640 for a complete suspension pin set) (Bandit, Rustler®, Stampede®)
TRAXXASSuspension screw pin set, steel (hex drive) (requires part #2640 for a complete suspension pin set) (Bandit®, Rustler®, Stampede®)
Traxxas 3827 Motor Drive Cup / Set Screw - Boats
TRAXXASTraxxas 3827 Motor Drive Cup / Set Screw - Boats
Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1)
TraxxasDriveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1)
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
TRAXXASDriveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Collars, screw (2)/ set screws, 3mm (2)
TRAXXASCollars, screw (2)/ grub screws, 3mm (2)
Driveshaft, center rear, 6061-T6 aluminum (black-anodized) (fully assembled)/ 3mm screw pin (2)
TRAXXASDriveshaft, center rear, 6061-T6 aluminum (black-anodized) (fully assembled)/ 3mm screw pin (2)
Drive cups, inner (2) (steel constant-velocity driveshafts)/ screw pins (2)
TRAXXASDrive cups, inner (2) (steel constant-velocity driveshafts)/ screw pins (2)
Pinion Gear, 18-T (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
TRAXXASDriveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Gear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
Differential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
TRAXXASDifferential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
Tailgate protector/ 3x8mm flat-head screw (4)
TRAXXASTailgate protector/ 3x8mm flat-head screw (4)
Driveshaft, center, plastic (black)/ screw pin
TRAXXASDriveshaft, center, plastic (black)/ screw pin
Pinion Gear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
TRAXXASGear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
Driveshaft, center, front (steel)/ 2.5x12 screw pin
TRAXXASDriveshaft, center, front (steel)/ 4x13 screw pin
Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
Screw pin set (Rustler®/ Bandit/ Stampede®)
TRAXXASScrew pin set (Rustler®, Bandit®, Stampede®)
Body mounts, front & rear/3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw (2)
TRAXXASBody mounts, front & rear/ 3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw (2)
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
TRAXXASDriveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Drive hub, front, hardened steel (1)/ screw pin (1)
TRAXXASDrive hub, front, hardened steel (1)/ screw pin (1)