TRAXXAS

Wheels, Weld gloss black (rear) (2)

Suspension arms, lower, black (left and right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

Springs, shock (natural finish) (GT-Maxx®) (1.210 rate) (2)

Bumper, rear/ bumper mount, rear

Bulkhead, front

Wheels, Weld black chrome (front) (2)

Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)/ screw pin (2)

Chassis (162mm Long Battery Compartment) (fits Flat Style Battery Packs) (use Only with #7430R Front Bulkhead and #6726X Battery Hold-Down)

Wheelie bar, black chrome (assembled)/ wheelie bar mount

Skid plate, roof (body)/ 3x12mm CS (4)

Housing, differential (rear)

Half shafts, short (heavy duty) (external-splined (2) & internal-splined (2))/ metal U-joints (4)

Data Link, Telemetry Expander (connects #6550X Telemetry Expander 2.0 to the Velineon® #3465 VXL-4s, #3485 Velineon® VXL-6s, Or #3496 Velineon® VXL...

Bumper, front/ skidplate, front (black)

Body washers, foam, 2mm (4)/ 3mm (4)/ 4mm (4)

Sensor, auto-detectable, temperature

Spur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)

Air filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (use with #5266 filter body) (TRX® 2.5, 2.5R, 3.3)

Drag link, machined 6061-T6 aluminum (orange-anodized)

Box, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2)

Springs, front (blue) (2)

Battery door, transmitter (replacement for #6516, 6517, 6528, 6529, 6530 transmitters)

Ball bearings, blue rubber sealed (5x8x2.5mm) (2)

MAXX® Link cable, telemetry expander (connects #6550X telemetry expander 2.0 to the #6590 high-voltage power amplifier)

Bumper, rear/ bumper mount, rear (pink)

Gear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link...

Stub axle carriers (2)

Turnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)

Differential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)

Skidplate, chassis

Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)

Suspension arms, front (right), heavy duty (upper (1)/ lower (1))