Filter
TRAXXAS
Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4)...
View full detailsSprings, front (blue) (2)
TRAXXASSprings, front (blue) (2)
Battery door, transmitter (replacement for #6516, 6517, 6528, 6529, 6530 transmitters)
TRAXXASBattery door, transmitter (replacement for #6516, 6517, 6528, 6529, 6530 transmitters)
Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
TRAXXASBall bearings, blue rubber sealed (5x8x2.5mm) (2)
MAXX® Link cable, telemetry expander (connects #6550X telemetry expander 2.0 to the #6590 high-voltage power amplifier)
TRAXXASMAXX® Link cable, telemetry expander (connects #6550X telemetry expander 2.0 to the #6590 high-voltage power amplifier)
Bumper, rear/ bumper mount, rear (pink)
TRAXXASBumper, rear/ bumper mount, rear (pink)
Gear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link set)
TRAXXASTurnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link...
View full detailsStub axle carriers (2)
TRAXXASStub axle carriers (2)
Turnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
TRAXXASTurnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
Differential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
TRAXXASDifferential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
Skidplate, chassis
TRAXXASSkidplate, chassis
Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
TRAXXASTurnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
Suspension arms, front (right), heavy duty (upper (1)/ lower (1))
TRAXXASSuspension arms, front (right), heavy duty (upper (1)/ lower (1))
LED light bar, front bumper (fits #8124 front bumper, requires #8028 power supply)
TRAXXASLED light bar, front bumper (fits #8124 front bumper, requires #8028 power supply)
Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS ...
View full detailsSuspension arms upper (1)/ suspension arm lower (1) (right front)
TRAXXASSuspension arms upper (1)/ suspension arm lower (1) (right front)
Bulkhead, front 4-TEC 2.0
TRAXXASBulkhead, front
Suspension arms, long (rear)
TRAXXASSuspension arms, long (rear)
Rebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)
TRAXXASRebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)
Rebuild kit, GTS shocks (x-rings, o-rings, pistons, bushings, e-clips, and rod ends)
TRAXXASRebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)
Receiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone grease
TRAXXASReceiver Box Cover (for Use Only with #8224 Receiver Box and #2260 BEC)/ Foam Pads/ Seals/ Silicone Grease
Springs, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)
TRAXXASSprings, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)
Suspension arms, rear (left & right)
TRAXXASSuspension arms, rear (left & right)
Ball bearings, black rubber sealed (5x8x2.5mm) (2)
TRAXXASBall bearings, black rubber sealed (5x8x2.5mm) (2)
Suspension pins, 44mm (2) w/ e-clips
TRAXXASSuspension pins, 44mm (2) with E-clips
Backing paint, ProGraphix®, black, acrylic (100mL)
TRAXXASBacking paint, ProGraphix®, black, acrylic (100mL)Traxxas ProGraphix® Custom RC Paints deliver professional-grade, airbrush-like results.ProGraphi...
View full detailsBody, TRX-4® Sport (clear, trimmed, requires painting)/ window masks/ decal sheet
TRAXXASBody, TRX-4® Sport (clear, trimmed, requires painting)/ window masks/ decal sheet
Suspension arms, blue, upper (left or right, front or rear), heavy duty (2)
TRAXXASSuspension arms, blue, upper (left or right, front or rear), heavy duty (2)
Push rod (molded composite) (red) (4)/ hollow balls (8)
TRAXXASPush rod (molded composite) (red) (4)/ hollow balls (8)
Skid plate, roof (body) (blue)/ 3x15mm CS (4) (requires #7713X to mount)
TRAXXASSkid plate, roof (body) (blue)/ 3x15mm CS (4) (requires #7713X to mount)
Stub axle, aluminum (red-anodized) (1) (for use only with #7750X driveshaft)
TRAXXASStub axle, aluminum, (red-anodized) (1) (for use only with #7750X or 7896 driveshaft)
Spring, shock (GTR) (0.82 rate, triple orange) (1 pair)
TRAXXASSpring, shock (GTR) (0.82 rate, triple orange) (1 pair)
Driveshaft assembly, center, aluminum
TRAXXASDriveshaft assembly, center, aluminum
Tailgate protector/ 3x8mm flat-head screw (4)
TRAXXASTailgate protector/ 3x8mm flat-head screw (4)
Tires & wheels, assembled, glued (SCT satin chrome, beadlock style wheels, Kumho tires, foam inserts) (2) (4WD front/rear, 2WD rear only)
TRAXXASTires & wheels, assembled, glued (SCT satin chrome, beadlock style wheels, Kumho tires, foam inserts) (2) (4WD front/rear, 2WD rear only)