Filter
TRAXXAS
Shock tower, front (left & right halves)
TRAXXASShock tower, front (left & right halves)
Ring gear, differential/ pinion gear, differential
TRAXXASRing gear, differential/ pinion gear, differential
Wheels, TRX-4® Sport 2.2 (2)
TRAXXASWheels, TRX-4® Sport 2.2 (2)
Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2)
TRAXXASWheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2)
SPUR GEAR 45-TOOTH
TRAXXASSpur gear, 45-tooth
Bulkhead, front (left & right halves)/ 3x10mm BCS (4)
TRAXXASBulkhead, front (left & right halves)/ 3x10mm BCS (4)/ 2.5x23mm CS (1)
Pinion gear, differential, 11-tooth (front) (heavy duty) (use with #7792 35-tooth differential ring gear)
TRAXXASPinion gear, differential, 11-tooth (front) (heavy duty) (use with #7792 35-tooth differential ring gear)
Ring gear, differential/ pinion gear, differential
TRAXXASRing gear, differential/ pinion gear, differential
Motor mount, finned aluminum
TRAXXASMotor mount, finned aluminum
Shock tower, rear
TRAXXASShock tower, rear
Motor mounts (front and rear)/ pins (2)
TRAXXASMotor mounts (front and rear)/ pins (2)
Wheel nuts, splined, 17mm, serrated (blue-anodized) (4)
TRAXXASWheel nuts, splined, 17mm, serrated (blue-anodized) (4)
Wire retainers, gear cover/ 3x4mm BCS (2)
TRAXXASWire retainers, gear cover/ 3x4mm BCS (2)
Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
TRAXXASTurnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Driveshaft, center, 6061-T6 aluminum (green-anodized)
TRAXXASDriveshaft, center, 6061-T6 aluminum (green-anodized)
Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)
TraxxasDifferential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®)...
View full detailsTires, Canyon AT 3.8' (2)/ foam inserts (2)
TRAXXASTires, Canyon AT 3.8" (2)/ foam inserts (2)
Bulkhead tie bars, front & rear, aluminum (blue-anodized)
TRAXXASBulkhead tie bars, front & rear, aluminum (blue-anodized)
Chassis, Slash 4X4
TRAXXASChassis, Slash 4X4
Body paint, ProGraphix®, Racing Green (5oz)
TRAXXASBody paint, ProGraphix®, Racing Green (5oz)Traxxas ProGraphix® Custom RC Paints deliver professional-grade, airbrush-like results with the easy app...
View full detailsHousings, differential, front
TRAXXASHousings, differential, front
Hold down, battery/ hold down retainer/ battery post/ angled body clip (allows for installation of taller, multi-cell batteries)
TRAXXASHold down, battery/ hold down retainer/ battery post/ angled body clip (allows for installation of taller, multi-cell batteries)
Steering blocks, 6061-T6 aluminum (green-anodized), left & right
TRAXXASSteering blocks, 6061-T6 aluminum (green-anodized), left & right Traxxas aluminum steering blocks combine total steering accuracy with bulletpr...
View full detailsBulkheads (l & r) (front) (gray)
TRAXXASBulkheads (l & r) (front) (grey)
Wheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins (2.5x10mm) (4)
TRAXXASWheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins (2.5x10mm) (4)
LED light set, complete (includes bumper with LED lights, roof skid plate with LED lights, 3-volt accessory power supply, and power tap connector (with cable) (fits #6717 body)
TraxxasRustler 4X4 LED Light KitBuilt Traxxas Tough™The Traxxas Rustler 4X4 takes stadium truck performance to new heights. The all-new High-Output Off Ro...
View full detailsSuspension arms (upper) (2) (fits T-Maxx®/E-Maxx)
TRAXXASSuspension arms (upper) (2) (fits T-Maxx®/E-Maxx)
Body paint, ProGraphix®, metallic black (13.5oz)
TRAXXASBody paint, ProGraphix™, metallic black (13.5oz)
Lead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector)
TRAXXASLead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector)
Shock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)
TRAXXASShock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)
Suspension arm guards, front (2)/ guard spacers (2)/ hollow balls (2)/ 3X16mm BCS (8)
TRAXXASSuspension arm guards, front (2)/ guard spacers (2)/ hollow balls (2)/ 3X16mm BCS (8)
Chassis brace kit, orange (fits Rustler® 4X4 or Slash 4X4 models equipped with Low-CG chassis)
TRAXXASChassis Brace Kit, Orange (fits Rustler® 4X4 Or Slash® 4X4 models Equipped with Low-CG Chassis)
Gear adapter, fixed
TRAXXASGear adapter, fixed
Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)
TRAXXASBox, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)
Suspension pins, 2.5x29mm (king pins) w/ e-clips (2) (strengthens caster blocks)
TRAXXASSuspension pins, 2.5x31.5mm (king pins) with E-clips (2) (strengthens caster blocks)