Model
BALL BEARING SET COMPLETE
TRAXXASBall bearing kit, black rubber sealed, complete (3x6x2.5mm (8), 5x8x2.5mm (4), 4x8x3mm (4), 8x12x3.5mm (2), 3.5x7x2.5mm (4)) Reduce friction and in...
View full detailsBall bearings, black rubber sealed (12x21x5mm) (2)
TRAXXASBall bearings, black rubber sealed (12x21x5mm) (2) Pair of 12x21x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal ...
View full detailsBody mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x8mm CS (2)/ 3x15mm flat-head machine screw (9)
TRAXXASBody mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (9) Front and rear Maxx® body mounts with ...
View full detailsBulkhead, front (upper) XRT
TRAXXASBulkhead, front (upper) Replacement front upper bulkhead Replacement part for these models: X-Maxx® X-Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz ...
View full detailsBulkhead, rear (upper) (fits X-Maxx® 8s or XRT™)
TRAXXASBulkhead, rear (upper) (fits X-Maxx® 8s or XRT®) Rear upper bulkhead fits 8s X-Maxx® and XRT® Replacement part for these models: XRT® XRT®: TQi...
View full detailsBUMPER MOUNT REAR
TRAXXASBumper mount, rear Rear bumper mount Replacement part for these models: XRT®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 78086-4)
Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS ...
View full detailsCarriers, stub axle (rear) (left & right)
TRAXXASCarriers, stub axle (rear) (left & right) These left and right rear stub axle carriers were redesigned and beefed-up for XRT®. Standard in XRT,...
View full detailsCaster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right
TRAXXASCaster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right Left and right green aluminum caster blocks improve the appearance, rug...
View full detailsCASTER BLOCKS GREEN L&R
TRAXXASCaster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replac...
View full detailsCharger, EZ-Peak® Plus 4s, 8 amp, NiMH/LiPo with iD® Auto Battery Identification
TraxxasPowerful. Easier. Safer.4S LiPo Compatibility with up to 8 Amps of Charging Power!There has never been an easier or safer way to charge your batter...
View full detailsChassis brace kit, orange (fits Rustler® 4X4 or Slash 4X4 models equipped with Low-CG chassis)
TRAXXASChassis Brace Kit, Orange (fits Rustler® 4X4 Or Slash® 4X4 models Equipped with Low-CG Chassis)
Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)
TraxxasDifferential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®)...
View full detailsDISPLAY STAND 155MM WHEELBASE
TRAXXASDisplay stand (155mm wheelbase) Put your TRX-4M™ on full display with this custom stand. The rigid foam stand holds your truck securely and prevent...
View full detailsDRIVE CUP F/R HARDENED
TRAXXASDrive cup, front or rear (hardened steel) (for differential pinion gear)/ driveshaft boots (2)/ boot retainers (2) Pair of replacement differential...
View full detailsDRIVESHAFTS CNTR MALE BLUE
TRAXXASDriveshafts, center, male (steel) (4)/ driveshafts, center, female, 6061-T6 aluminum (blue-anodized) (front & rear)/ 1.6x7mm BCS (with threadlo...
View full detailsHARDWARE KIT COMPLETE
TRAXXASHardware kit, complete (contains all hardware used on 1/18-scale TRX-4M™) (includes clear plastic storage container)Give your TRX-4M™ a complete re...
View full detailsLED light harness/ power harness/ zip ties (9) (fits #9311 body)
TraxxasCorvette Stingray LED Light KitExtreme Scale DetailThe Traxxas 4-Tec 3.0 Corvette Stingray set the standard for replica scale detail in 1/10 RC mod...
View full detailsLED light set, complete (includes bumper with LED lights, roof skid plate with LED lights, 3-volt accessory power supply, and power tap connector (with cable) (fits #6717 body)
TraxxasRustler 4X4 LED Light KitBuilt Traxxas Tough™The Traxxas Rustler 4X4 takes stadium truck performance to new heights. The all-new High-Output Off Ro...
View full detailsLED light set, complete with power supply (contains headlights, tail lights, side marker lights, & distribution block) (fits #8130 series bodies)
TraxxasTRX-4 Blazer Light KitUltimate Scale Looks and Rock-Solid Durability The Traxxas TRX-4 Chevrolet K5 Blazer delivers scale appearance and detail lik...
View full detailsLED light set, Sledge, complete (includes body bumper with LED lights, roof skid plate with LED lights, #6590 high-voltage power amplifier)
TraxxasHigh-Output Off-Road Light Kit for SledgeSledge® was built to a new level of precision and toughness to create a unique driving experience. The new...
View full detailsLED Rock Light Kit TRX-4
TraxxasLED rock light kit, TRX-4®/TRX-6™ (requires #8028 power supply and #8018, #8072, or #8080 inner fenders) Traxxas LED Rock Lights install directly i...
View full detailsMini Maxx BL-2s black
TRAXXASMini Maxx BL-2s A New Way to Experience Maxx Fun Overbuilt and over-the-top, the all-new Mini Maxx captures the engineering, unmatched power...
View full detailsMini Maxx BL-2s Green
TRAXXASMini Maxx BL-2s A New Way to Experience Maxx Fun Overbuilt and over-the-top, the all-new Mini Maxx captures the engineering, unmatched power...
View full detailsMotor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 6.5mm gold-plated bullet connectors) (for Maxx®/Hoss™) (not for use in marine models)
TRAXXASMotor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 6.5mm gold-plated bullet connectors) (for Maxx®/Hoss®) (not for use in marine models)
Pro Scale LED Light Complete #8010/9230
TraxxasTRX-4 1979 Ford Bronco & F-150 Pro Scale LED Light Set All the lighting control of a full-scale truck is at your fingertips with the Pro Scale®...
View full detailsPro Scale® Advanced Lighting Control System (includes power module & distribution block)
TRAXXASPro Scale® Advanced Lighting Control System Specs, videos, FAQs, and more Learn MoreTraxxas Pro Scale LightingTraxxas LED lighting sets the standar...
View full detailsROLL BAR ASSM W/LIGHT BAR/MOUNTS
TRAXXASRoll bar (assembled with LED lights)/ mounts (front (2), rear (left & right))/ 2.6x12mm BCS (self-tapping) (4) (fits #9212 or 9230 series bodie...
View full detailsSERVO DIGITAL HIGH TORQUE METAL GEAR BB
TRAXXASHigh-Torque 347 Digital Metal Gear ServoThe ultra-high-torque 2275 digital ball bearing servo provides precise control and maximum torque in a stan...
View full detailsSHOCK ASSM W/O SPRINGS
TRAXXASShocks, GTM (assembled w/o springs) (2) Replacement part for these models: TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Ford® Bronco® (Model# 97074-1...
View full detailsSHOCK BODY BLUE
TRAXXASBody, GTM shock, 6061-T6 aluminum (blue-anodized) (includes spring pre-load spacers) (2) Give your TRX-4M™ a custom look with these colorful GTM sh...
View full detailsSPUR GEAR 52T MACH STEEL 1.0MP
TRAXXASSpur gear, 52-tooth, machined steel (1.0 metric pitch) Accessory part for these models: Sledge® Sledge®: TQi Traxxas Link Enabled 2.4GHz Radio ...
View full detailsSpur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
TRAXXASSpur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
STEERING BLOCKS GREEN L&R
TRAXXASSteering blocks, extreme heavy duty, green (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement left and right steering ...
View full detailsSteering blocks, 6061-T6 aluminum (green-anodized), left & right
TRAXXASSteering blocks, 6061-T6 aluminum (green-anodized), left & right Traxxas aluminum steering blocks combine total steering accuracy with bulletpr...
View full detailsSteering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4)
TRAXXASSteering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum steering blocks impro...
View full details